Showing posts with label Plasticologist. Show all posts
Showing posts with label Plasticologist. Show all posts

Wednesday, April 14, 2021

Bayer Makrolon Polycarbonate Sheets offering light weight and break resistance

Bayer Makrolon Polycarbonate products offer a unique balance of useful features this includes temperature resistance, impact resistance and optical properties position polycarbonates in between commodity plastic materials and engineering materials.
Polycarbonate is definitely a high quality material. Whilst it offers considerable impact-resistance, it has lower scratch-resistance and thus a hard coating may be applied to polycarbonate eyewear and polycarbonate exterior automotive components. The properties associated with polycarbonate tend to be along the lines of those of polymethyl methacrylate (PMMA, acrylic), except polycarbonate is actually stronger, it is usable in a wider temperature range and is a bit more expensive. This plastic polymer is highly transparent to visible light and it has better light transmission characteristics than several types of glass.
Polycarbonate has a glass transition temperature near 150 °C (302 °F), as a result it softens slowly above this point and flows above about 300°C (572 °F). Tools are required to be held at warm to high temperatures, generally above 80 °C (176 °F) to help make strain- and reduced stress products.
Unlike many thermoplastics, polycarbonate can undergo massive deformations without cracking. Subsequently, it may be processed and formed   cold using standard sheet metal techniques, for example forming bends with a brake. Even for sharp angle bends with a tight radius, no heating is generally necessary. This makes it useful for prototyping applications where transparent or electrically non-conductive parts are essential, which may not be produced from sheet metal. Remember that PMMA/Plexiglas, which is similar in appearance to polycarbonate, but is brittle and cannot be bent without heating.
Polycarbonate is commonly used in eye protection, as well as in other projectile-resistant viewing and lighting applications that would normally be thought of as requiring the use of glass, but require much higher impact-resistance. Several types of lenses are created from polycarbonate, including automotive headlamp lenses, lighting lenses, sunglass/eyeglass lenses, swimming and SCUBA goggles, and safety glasses for use in sporting helmets/masks and police riot gear. Windscreens in small motorized vehicles are normally made out of polycarbonate, such as for motorcycles, ATVs, golf carts, and small planes and helicopters.

plastic sheets and sheeting

performance plastics

Wednesday, March 24, 2021

Lexan Polycarbonate Flat Sheet offering light weight and break resistance

Bayer Makrolon Polycarbonate materials give you a balance of helpful features which include temperature resistance, impact resistance and optical properties position polycarbonates between commodity plastics and engineering materials.
Polycarbonate is a very rugged material. Whilst it features significant impact-resistance, it's got minimal scratch-resistance and thus a hard coating could be applied to polycarbonate eye wear lenses as well as polycarbonate exterior vehicle equipment. The characteristics relating to polycarbonate are generally like those of common Acrylic materials, but polycarbonate is going to be stronger, it is usable in a wider temperature range and is a bit more expensive. This plastic polymer is highly transparent to visible light and it has better light transmission characteristics than several types of glass.
Polycarbonate carries a glass transition temperature of about 150 °C (302 °F), consequently it softens slowly above this point and flows above about 300°C (572 °F). Tools ought to be held at warm to high temperatures, generally above 80 °C (176 °F) to make strain- and almost stress free products.
Unlike almost all other thermoplastics, polycarbonate can undergo large changes in basic shape without cracking. Due to this fact, it may be processed and formed   without needing to be heated using sheet metal techniques, for example forming bends on a brake. For even sharp angle bends having a tight radius, no heating is usually necessary. This makes it attractive prototyping applications where transparent or electrically non-conductive parts are needed, which should not be crafted from sheet metal. Remember that PMMA/Plexiglas, that is certainly similar in looks to polycarbonate, but it's brittle and can't be bent without heating.

The light weight of polycarbonate, unlike glass, has led to development of electronic display screens that replace glass with polycarbonate, for use in mobile and portable devices. Such displays include newer e-ink and many LCD screens, though CRT, plasma screen and other LCD technologies which still do require glass for its higher melting temperature and its ability to be etched with finer detail.
Other types of items produced from Polycarbonate include durable, lightweight luggage, MP3/digital audio player cases, computer cases, riot shields, instrument panels, and common style blender jars. Many toys and hobby items are produced from polycarbonate parts, e.g. fins, gyro mounts, and flybar locks for use with radio-controlled helicopters.
For use in applications exposed to weathering or UV-radiation, a special surface treatment is needed. This may be a coating (e.g. for improved abrasion resistance), or perhaps the coextrusion for enhanced weathering resistance.
The Makrolon Polycarbonate is a thermoplastic that begins as a solid material in the form of small pellets. In a manufacturing process called injection molding, these small pellets are heated until they begin to melt. The melted liquid polycarbonate is then rapidly pushed into the mold - shaped like the part, compressed under high pressure and cooled to form a finished product in less than a minute.


local engineering plastic materials